PHP Operators PHP Operator is a symbol i.e used to perform operations on operands. In simple words, operators are used to perform operations on variables or values. For example:
In the above example, + is the binary + operator, 10 and 20 are operands and $num is variable. PHP Operators can be categorized in following forms:
We can also categorize operators on behalf of operands. They can be categorized in 3 forms:
 Unary Operators: works on single operands such as ++,  etc.
 Binary Operators: works on two operands such as binary +, , *, / etc.
 Ternary Operators: works on three operands such as "?:".
Arithmetic Operators The PHP arithmetic operators are used to perform common arithmetic operations such as addition, subtraction, etc. with numeric values.
Operator 
Name 
Example 
Explanation 
+ 
Addition 
$a + $b 
Sum of operands 
 
Subtraction 
$a  $b 
Difference of operands 
* 
Multiplication 
$a * $b 
Product of operands 
/ 
Division 
$a / $b 
Quotient of operands 
% 
Modulus 
$a % $b 
Remainder of operands 
** 
Exponentiation 
$a ** $b 
$a raised to the power $b 
The exponentiation (**) operator has been introduced in PHP 5.6.
Assignment Operators The assignment operators are used to assign value to different variables. The basic assignment operator is "=".
Operator 
Name 
Example 
Explanation 
= 
Assign 
$a = $b 
The value of right operand is assigned to the left operand. 
+= 
Add then Assign 
$a += $b 
Addition same as $a = $a + $b 
= 
Subtract then Assign 
$a = $b 
Subtraction same as $a = $a  $b 
*= 
Multiply then Assign 
$a *= $b 
Multiplication same as $a = $a * $b 
/= 
Divide then Assign (quotient) 
$a /= $b 
Find quotient same as $a = $a / $b 
%= 
Divide then Assign (remainder) 
$a %= $b 
Find remainder same as $a = $a % $b 
Bitwise Operators The bitwise operators are used to perform bitlevel operations on operands. These operators allow the evaluation and manipulation of specific bits within the integer.
Operator 
Name 
Example 
Explanation 
& 
And 
$a & $b 
Bits that are 1 in both $a and $b are set to 1, otherwise 0. 
 
Or (Inclusive or) 
$a  $b 
Bits that are 1 in either $a or $b are set to 1 
^ 
Xor (Exclusive or) 
$a ^ $b 
Bits that are 1 in either $a or $b are set to 0. 
~ 
Not 
~$a 
Bits that are 1 set to 0 and bits that are 0 are set to 1 
<< 
Shift left 
$a << $b 
Left shift the bits of operand $a $b steps 
>> 
Shift right 
$a >> $b 
Right shift the bits of $a operand by $b number of places 
Comparison Operators Comparison operators allow comparing two values, such as number or string. Below the list of comparison operators are given:
Operator 
Name 
Example 
Explanation 
== 
Equal 
$a == $b 
Return TRUE if $a is equal to $b 
=== 
Identical 
$a === $b 
Return TRUE if $a is equal to $b, and they are of same data type 
!== 
Not identical 
$a !== $b 
Return TRUE if $a is not equal to $b, and they are not of same data type 
!= 
Not equal 
$a != $b 
Return TRUE if $a is not equal to $b 
<> 
Not equal 
$a <> $b 
Return TRUE if $a is not equal to $b 
< 
Less than 
$a < $b 
Return TRUE if $a is less than $b 
> 
Greater than 
$a > $b 
Return TRUE if $a is greater than $b 
<= 
Less than or equal to 
$a <= $b 
Return TRUE if $a is less than or equal $b 
>= 
Greater than or equal to 
$a >= $b 
Return TRUE if $a is greater than or equal $b 
<=> 
Spaceship 
$a <=>$b 
Return 1 if $a is less than $b Return 0 if $a is equal $b Return 1 if $a is greater than $b 
Incrementing/Decrementing Operators The increment and decrement operators are used to increase and decrease the value of a variable.
Operator 
Name 
Example 
Explanation 
++ 
Increment 
++$a 
Increment the value of $a by one, then return $a 
$a++ 
Return $a, then increment the value of $a by one 
 
decrement 
$a 
Decrement the value of $a by one, then return $a 
$a 
Return $a, then decrement the value of $a by one 
Logical Operators The logical operators are used to perform bitlevel operations on operands. These operators allow the evaluation and manipulation of specific bits within the integer.
Operator 
Name 
Example 
Explanation 
and 
And 
$a and $b 
Return TRUE if both $a and $b are true 
Or 
Or 
$a or $b 
Return TRUE if either $a or $b is true 
xor 
Xor 
$a xor $b 
Return TRUE if either $ or $b is true but not both 
! 
Not 
! $a 
Return TRUE if $a is not true 
&& 
And 
$a && $b 
Return TRUE if either $a and $b are true 
 
Or 
$a  $b 
Return TRUE if either $a or $b is true 
String Operators The string operators are used to perform the operation on strings. There are two string operators in PHP, which are given below:
Operator 
Name 
Example 
Explanation 
. 
Concatenation 
$a . $b 
Concatenate both $a and $b 
.= 
Concatenation and Assignment 
$a .= $b 
First concatenate $a and $b, then assign the concatenated string to $a, e.g. $a = $a . $b 
Array Operators The array operators are used in case of array. Basically, these operators are used to compare the values of arrays.
Operator 
Name 
Example 
Explanation 
+ 
Union 
$a + $y 
Union of $a and $b 
== 
Equality 
$a == $b 
Return TRUE if $a and $b have same key/value pair 
!= 
Inequality 
$a != $b 
Return TRUE if $a is not equal to $b 
=== 
Identity 
$a === $b 
Return TRUE if $a and $b have same key/value pair of same type in same order 
!== 
NonIdentity 
$a !== $b 
Return TRUE if $a is not identical to $b 
<> 
Inequality 
$a <> $b 
Return TRUE if $a is not equal to $b 
Type Operators The type operator instanceof is used to determine whether an object, its parent and its derived class are the same type or not. Basically, this operator determines which certain class the object belongs to. It is used in objectoriented programming.
Output:
Charu is a developer.
bool(true) bool(false)
Execution Operators PHP has an execution operator backticks (``). PHP executes the content of backticks as a shell command. Execution operator and shell_exec() give the same result.
Operator 
Name 
Example 
Explanation 
`` 
backticks 
echo `dir`; 
Execute the shell command and return the result. Here, it will show the directories available in current folder. 
Note: Note that backticks (``) are not singlequotes.
Error Control Operators PHP has one error control operator, i.e., at (@) symbol. Whenever it is used with an expression, any error message will be ignored that might be generated by that expression.
Operator 
Name 
Example 
Explanation 
@ 
at 
@file ('non_existent_file') 
Intentional file error 
PHP Operators Precedence Let's see the precedence of PHP operators with associativity.
Operators 
Additional Information 
Associativity 
clone new 
clone and new 
nonassociative 
[ 
array() 
left 
** 
arithmetic 
right 
++  ~ (int) (float) (string) (array) (object) (bool) @ 
increment/decrement and types 
right 
instanceof 
types 
nonassociative 
! 
logical (negation) 
right 
* / % 
arithmetic 
left 
+  . 
arithmetic and string concatenation 
left 
<< >> 
bitwise (shift) 
left 
< <= > >= 
comparison 
nonassociative 
== != === !== <> 
comparison 
nonassociative 
& 
bitwise AND 
left 
^ 
bitwise XOR 
left 
 
bitwise OR 
left 
&& 
logical AND 
left 
 
logical OR 
left 
?: 
ternary 
left 
= += = *= **= /= .= %= &= = ^= <<= >>= => 
assignment 
right 
and 
logical 
left 
xor 
logical 
left 
or 
logical 
left 
, 
many uses (comma) 
left 
